Why do the power locks click but the doors don’t lock/unlock?Why do the power locks click but the doors don’t lock/unlock?
Home >
Gari Forums >
Chery Forums >
Chery Tiggo 8 Pro Forums >
Chery Tiggo 8 Pro Power Door Lock Issues Forums
Why do the power locks click but the doors don’t lock/unlock?Why do the power locks click but the doors don’t lock/unlock?
I press the remote key fob o r the in‑car lock button, and I hear a faint “click” noise from the doors — but the door actually stays locked or stays unlocked, the latch doesn’t move. This happens sometimes on all doors o r sometimes only one door. Could it be a worn actuator, a weak motor inside the lock mechanism, o r a failing linkage between the actuator and latch in my Tiggo 8 Pro?
1 Answer
5 views |
Talha Kyanii asked on 06 Dec 2025 10:31:31 am
1 Answer
Gari Master - on 06 Dec 2025 10:32:58 amWhen you hear a click but the door doesn’t move, the issue is usually the door lock actuator o r linkage:
Worn o r weak actuator motor: The motor inside the lock may be too weak to move the latch.
Faulty linkage: The rod o r mechanism connecting the actuator to the door latch may be loose, bent, o r disconnected.
Electrical issues: Voltage o r poor wiring can prevent the actuator from receiving full power.
Action:
Inspect the door actuator and linkage inside the door panel.
Check for loose o r disconnected rods.
Test the actuator with direct 12V power replace if it doesn’t operate correctly.
Worn o r weak actuator motor: The motor inside the lock may be too weak to move the latch.
Faulty linkage: The rod o r mechanism connecting the actuator to the door latch may be loose, bent, o r disconnected.
Electrical issues: Voltage o r poor wiring can prevent the actuator from receiving full power.
Action:
Inspect the door actuator and linkage inside the door panel.
Check for loose o r disconnected rods.
Test the actuator with direct 12V power replace if it doesn’t operate correctly.
Related Topics
User Also Viewed





